|
|
 |
|
|
|
|
|
|
Switch Prosafe Gigabit Stackable Smart Gs748ts 48x 10/100/1000mbps 4x Sfp
|
|
Email us stating the Part Number, if you require more information.
All goods are covered by manufacturers waranty |
|
|
|
|
|
|
| Gigabit Stackable Smart Switch comes with 48 10/100/1000 ports with
four shared SFP ports that provide high performance for
bandwidth-intensive applications like ERP and large file transfers.
In addition, two dedicated ports provide a 20 Gbps, dual-ring,
stacking bus that accommodates growth and offers the highest level
of resiliency, thus allowing you to stack up to six switches or 288
10/100/1000 ports and easily manage them all with a single IP
address. Finally, these switches come with a complete suite of
advanced features for more robust security, higher quality of
service and high availability. This switch is equipped with highly
advanced features such as Access Control Lists (ACL), 802.1x port
authentication, enhanced QoS, rate limiting and IGMP Snooping among
others to provide a small and medium-sized business with a network
that is geared for growth while providing scalability and
reliability.
|
|
Network Protocol and Standards
Compatibility
-
IEEE 802.3 10BASE-T
-
IEEE 802.3u 100BASE-TX
-
IEEE 802.3ab
1000BASE-T
-
IEEE 802.3z 1000BASE-X
-
IEEE 802.3x full-duplex flow
control
Interfaces
-
48 10/100/1000 Mbps switching
ports
-
4 Built-in shared SFP Gigabit
Ethernet fiber ports for 100/1000 Mbps
connectivity
-
Auto-sensing and
auto-negotiating capabilities for all copper ports
-
Auto Uplink on all ports to
make the right connection
Administrative Switch
Management
-
IEEE 8021.Q VLAN (128 groups,
Static)
-
IEEE 802.1p Class of Service
(CoS)
-
Port-based QoS
-
IEEE 802.3ad Static or
Dynamic Link Aggregation (LACP)
-
IEEE 802.1D Spanning Tree
Protocol
-
SNMP v1, v2c, v3
-
RFC 1213 MIB II
-
RFC 1643 Ethernet Interface
MIB
-
RFC 1493 Bridge MIB
-
RFC 2131 DHCP client
-
IEEE 802.1x (RADIUS)
-
Access Control List
(ACL)
-
Layer 3 (DSCP) Quality of
Service (QoS)
-
TACACS+
-
Port-based security by locked
MAC addresses
-
Storm control for broadcast,
multicast and unknown unicast packets
-
Port-based ingress/egress
rate limiting
-
SNTP
-
RMON group 1, 2, 3, 9
-
Private Enterprise MIB
-
Port Mirroring Support
-
Cable test
-
Web-based
configuration
-
Configuration
Backup/Restore
-
Password Access
Control
-
Firmware upgradeable
Performance
Specifications
-
Forwarding modes:
Store-and-forward
-
Bandwidth: 96
Gbps
-
Stacking bandwidth: 20
Gbps
-
Network latency: Less than 20
microseconds for 64-byte frames in store-and-forward mode
for 1000 Mbps to 1000 Mbps transmission
-
Buffer memory: 128 KB
-
Address database size: 8,000
media access control (MAC) addresses per system
-
Addressing: 48-bit MAC
address
-
Mean Time Between Failure
(MTBF): 84,000 hours (~9 years)
LEDs
-
Unit: Power, Master, Stack
ID
-
Per Port: Link, Speed,
Activity
-
Per Gigabit Port: Link,
Speed, Activity, Stack
Power Supply
-
Power Consumption:
78.36W
-
100-240VAC/50-60 Hz universal
input
Physical
Specifications
-
Dimensions: (H x W x D): 1.70
x 17.32 x 10.12 in. (43.2 x 440 x 257 mm)
-
Weight: 8.91 / 4.05
(lbs/kg)
Environmental
Specifications
-
Operating temperature: 32 to
104° F (0 to 50° C)
-
Storage temperature: -4 to
158° F (-20 to 70° C)
-
Operating humidity: 90%
maximum relative humidity, non-condensing
-
Storage humidity: 95% maximum
relative humidity, non-condensing
-
Operating altitude: 10,000 ft
(3,000 m) maximum
-
Storage altitude: 10,000 ft
(3,000 m) maximum
Electromagnetic
Compliance
-
CE mark, commercial
-
FCC Part 15 Class A
-
VCCI Class A
-
EN 55022 (CISPR 22),
-
EN 55024 (CISPR 24)
-
C-Tick
|
|
|
>> Return to top
|
|
|
|
|
|
|
